ShopWoodpeckers

The rings are well made, but the holder could use some attention as more than an after thought. A nicer wood and higher sides would hold th etings better against tipping.

Great table, couldn't have built one cheaper, when you factor in your time. Only complaint is that the tracks aren't heavier-duty so my Kreg clamps would fit, but I'll just have to make plates that they can mount to & that then slide in the tracks.

The Woodpeckers Super Fence Single Offset - 36" (SF-36SINGLE)for router tables comes with a front mounting track that mounts on the tope facing track to be used for some options like the clear plastic safety shield for the router bit, which is also included with the fence. When this tack is used, the Super Track Flip Stop is not compatible. While it can be mounted on the front facing track, it is either too short or too long, depending on which way it is mounted; rendering it useless with some dimensions of wood. It seems that either the shield to fit the top upward facing track (& maybe eliminate the front facing track option)or the flip stop should be redesigned to accommodate both the front facing and the top facing track options.

This is a high quality router plate but it could be better with two changes - 1- it just sits in the router table held down by the weight of the router - it would be better if it could be screwed to the router table 2 - it has a lot of unused holes in it for apparently securing other Triton routers and/or other things. It would be better without these holes or if plugs could be put in unused holes.

Work fine. Could use type with built-in threads and metal bearing surface. Do you have such?