ArmorPoxy

The purchased kit had leakage of the blue resin in buckets, after contacting Armor Poxy with photos, replacements were sent pronto. 2 gallons of standard primer covered 650 sq ft with little left over. Need really good ventilation, plenty of foul odor. Dries very quickly. The Racing Blue 900 sq ft kit was totally used to cover the 650 sq ft floor. I would not want to use less, be difficult to roll thin enough. Work time was plenty long on a 60 degree day, in shade, and with the product at approximately 50 degrees. Still finger printable the next day. The flakes make a rough surface, and with the grit added to topcoat, it's not too slippery when wet. The epoxy alone is extremely slippery when wet. The topcoat is thin enough to cover lots, 2/3 gallon per 650 sq ft. I applied 2 coats. Dries quicky. Epoxy and topcoat both low odor. Lids on product jugs were not tightened sufficiently enough to keep jugs sealed well. Good product.

Wonderful product, easy instructions for step by step. Finish is very nice, only challenge was the clear coat. Difficult to track where I applied it and once dry I had areas I missed. Unfortunately took about 10 days to get a small kit to finish, delaying time able to use garage. If you guys can make delivery a quicker turn around that would be the ONLY thing I suggest to improve. Love our finished product!

Everything was great but I honestly struggled slightly with the mixing ingredients instructions. It max be silly but adding basic things “gallons of A and B can be found individually contained within the mixing buckets” would be great!

Quick shipping, good product and easy to apply. Only negative is that the tractionizer powder was very fine, and did not seem to provide enough coarse grit. Would order this again

Basement floor came out nice, a little bit of a learning curve working the product for the first time but overall great product at a good price!