ArmorPoxy

Overall product seems good. Shipping time was much longer than expected. Should have ordered twice as much product to achieve desired results. Not really wanting to sand the floor and spend another 1600 to apply second coat.

Although advertising itself as a kit, it did not come with everything that was necessary for the job. There were only 4 rollers for 3 coats, no roller heads, two squeeges for 3 coats, and no handles for the roller heads or squeegees. Additionally, there were limited to no instructions depending on which layer of coating. Giving two stars because at the end of the day, the materials did what they were meant to do but all around a disappointing experience. Also came damaged during shipping but no type of reimbursement was offered.

They don't send enough primer to cover the entire are.

Unfortunately, not a great experience. Spent more than a week working with sales rep to select and ensure I had the correct product/order for a 1600 sq ft job, with no less than 5 emails that clearly indicated epoxy color. Ultimately received the wrong color. Clear coat cans and plastic epoxy lids were also damaged/leaking in shipping (or prior) but it wasn’t evident until opening boxes/containers several days after receipt or would have refused delivery. Was shipped Khaki Tan rather than Desert Tan so when I saw “Tan” it didn’t immediately click when I opened boxes. Unfortunately my better half had already mixed small amount of epoxy and started to cut in before realizing color was not correct. Since epoxy must be applied to primer coat within 20 hours I’ll now have to machine/scuff the entire 1600 sq ft primered surface to “re-prep” when replacement product arrives. Lost the entire holiday weekend I had slated to complete the job and had to push other work on the project because floors now won’t be able to restart for another 10 days (3 days to correct order and ground shipping of correct color). I realize ground shipping is necessary given for haz materials. Would have expected better for an exceedingly premium priced $3k product. “Sorry keyed in wrong color code” and a small discount on additional primer now necessary to cover the wrong color cut in, just wasn’t a sufficient remedy.

I live in high rise condominium and I used TWO gallons of ARMORTRAK (color was Smooth Cream) to seal my exterior balcony floor. . . . I did my trim work with a brush and then painted out the remaining paint by hand on the balcony floor. . . . . I got a nice smooth coat on the floor. . . . However, that was a lot of work, so I decided to roll the rest of the balcony using the second gallon of paint and one of the ARMORTRAK roller covers that I had ordered along with the paint. . . . . . It looked like the paint was going on real nice, but upon inspection when the paint was dry there were lots of little bumps on the surface. . . . . There were around five to ten per square inch, and they were about the size of beach sand. . . . . . I have seen such an issue before with paint from Sherwin Williams, and when I went back to the store, I showed them a sample I painted on a piece of wood. . . . They said the paint was "seeded", and they gave me a new gallon of paint. . . . . If you give me a phone number to use, I will send you a picture to describe what I am seeing on the floor. . . . . . .